Abstract
The local spalling induced by the propagation and coalescence of cracks in the ceramic layer is the fundamental reason for the thermal barrier coatings (TBCs) failure. To clarify the effects of horizontal and vertical cracks on the coating failure, an integrated model combining dynamic TGO growth and ceramic sintering is developed. The effects of cracks on the normal and shear stress characteristics are analyzed. The driving force and propagation ability of cracks under different configurations are evaluated. The interaction between horizontal and vertical cracks is explored by analyzing the variation of the crack driving force. The results show that TGO growth causes the ratcheting increase of σ22 tensile stress above the valley, and the σ12 shear stress is on both sides of the peak. Ceramic sintering mainly contributes to the ratcheting increase of σ11 tensile stress. There is minimum strain energy when the horizontal crack extends to the peak. The vertical cracks on the surface of the ceramic layer are easier to propagate through the coating than that of other locations. When the horizontal and vertical cracks simultaneously appear near the valley, they can promote the propagation of each other. The present results can offer theoretical support for the design of an advanced TBC system in the future.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
