Abstract
In the present study, a novel combined heat and power system is proposed to use in natural gas city gate stations. The proposed cogeneration system is used for power generation and satisfying heating requirements of the natural gas preheating in city gate stations. The system is composed of a regenerative gas turbine cycle, a heat exchanger and a Kalina cycle integrated with a city gate station heater. A comprehensive sensitivity analysis and single- and multi-objective optimizations are applied to investigate the system performance. The analysis is based on energetic, exergetic, environmental and economic standpoints which includes all important effective parameters (compressor presser ratio rCom, gas turbine inlet temperature TGT, ammonia base concentration XNH3, condenser pinch point temperature difference ΔTPP,Con, ambient temperature Tamb and inlet NG pressure PNG,in). Also, in addition to the energetic and exergetic efficiencies, a new performance criterion is defined as the system’s annual costs to incomes ratio (this new function covers economic and environmental criteria simultaneously). The outputs of sensitivity analysis reveal that, rCom affects significantly on all of the three performance criteria; also, Tamb and PNG,in has the most impact on energetic efficiency. The exergetic analysis at the base system conditions shows that the combustion chamber has the maximum contribution in total exergy destruction with a share of 54.96%. This share is reduced by 3.65% in multi-objective optimization mode. Also, comparing the outputs of the base system and the multi-objective optimization mode for the proposed cogeneration system represents 30.72%, 3.48% and 10.55% improvement in energetic efficiency, exergetic efficiency and system’s annual costs to incomes ratio, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.