Abstract
ABSTRACTWhile vinyl-terminated butadiene acrylonitrile is frequently used for the toughening of vinylester and polyester, very limited research has been conducted on modification of epoxy with this oligomer. Herein, the effect of vinyl-terminated butadiene acrylonitrile addition to epoxy in bulk and glass reinforced composite is systematically investigated. Thermo-physical behavior and mechanical characteristics of the samples are determined. To interpret the test results, the void content of reinforced samples is measured and fracture surface of the specimens is investigated. It is found that vinyl-terminated butadiene acrylonitrile improves the toughness with slight negligible effects on other characteristics. Incorporation of 15 phr of vinyl-terminated butadiene acrylonitrile increases the KIC of epoxy from 0.6 MPa to 2.3 MPam0.5. Similarly, addition of 15 phr vinyl-terminated butadiene acrylonitrile leads to 67% enhancement in the interlaminar fracture toughness of composites. The toughening mechanisms and toughness transfer from bulk to composite are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.