Comprehensive study on the selection and performance of the best electrode pair for electrocoagulation of textile wastewater using multi-criteria decision-making methods (TOPSIS, VIKOR and PROMETHEE II)

Abstract

The accelerating environmental impact of the textile industry, especially in water management, requires efficient wastewater treatment strategies. This study examines the effectiveness of various electrode pairs in the Electrocoagulation (EC) process for treating textile wastewater, focusing on removing of Total Suspended Solids (TSS), turbidity, Chemical Oxygen Demand (COD), and Total Organic Carbon (TOC). A comprehensive analysis was conducted using thirty-six electrode pair combinations, consisting of six materials: Aluminium (Al), Zinc (Zn), Carbon (C), Copper (Cu), Mild Steel (MS), and Stainless Steel (SS). The results demonstrated that different electrode pairs yielded varying removal efficiencies for various pollutants, with the highest efficiencies being 92.09% for COD (Al–C pair), 99.66% for TSS (Al–Cu pair), 99.17% for turbidity (Al-MS pair), and 70.99% for TOC (SS-SS pair). However, no single electrode pair excelled in removing all pollutant categories. To address this, three Multi-Criteria Decision Making (MCDM) methods such as TOPSIS, VIKOR, and PROMETHEE II were used to assess the most effective electrode pair. The results indicated that the Al–Zn combination was the most efficient, exhibiting high removal efficiencies for various pollutants (99.32% for TSS, 98.88% for turbidity, 68.62% for COD, and 57.96% for TOC). This study demonstrates that the EC process can effectively treat textile effluent and emphasizes the importance of selecting suitable electrode materials. Furthermore, pollutant removal was optimal with the Al–Zn electrode pair, offering a balanced and efficient approach to textile wastewater treatment. Thus, MCDM methods offer a robust framework for assessing and optimizing electrode selection, providing valuable insights for sustainable environmental management practices.