Comprehensive study on catalytic potential of Ti3C2Tx based catalyzer for Dye sensitized solar cells application

Abstract

Abstract Recently Dye-sensitized solar cells (DSSC) have gained significant research limelight for having exceptional photovoltaic potential. However, DSSC became an underdog solar cell due to the use of an expensive transparent conductive layer (FTO/ITO) along with the use of rare earth element Pt to concoct counter electrode (CE). Thus, an attempt has been made to concoct a Ti3C2-TX MXene-based CE to replace both the transparent conductive layer and CE. Herein, relatively larger with less defective Ti3C2 flakes were produced by the minimally intensive layer delamination method, and physical architecture was investigated by X-ray diffraction (XRD) mapping, Field-emission scanning electron microscope (FE-SEM) and Dynamic light scattering (DLS), respectively. MXene flakes were drop cast on a glass substrate by dispersing it in ethanol, isopropyl alcohol, and deionized water, respectively, and found the least sheet resistance, 14.824 Ω/sq by 4-point probe test, owing to superior adsorption force with the glass substrate. Ethanol solvent facilitates optimum interlamellar spacing to promote fast diffusion and transportation. Further, the study was expanded by introducing it to numerous sintering temperatures to find the best result. The result revealed exceptional sheet resistance of 0.08 Ω/sq for the 120℃ sintered sample, which was encouraged by removing water intercalant and occupying H+. Further, the potential of MXene-based counter electrode’s catalytic activity has been studied through electrochemical impedance spectroscopy, Tafel polarization, and Cyclic voltammogram under iodide and triiodide-based electrolytes. The electrochemical study revealed 120℃ sintered sample superior to 140℃ sintered but comparable to Pt CE. 120℃ sintered Ti3C2-based CE performed exceptional 6.27% power conversion efficiency. Thus, this novel study communicates that Ti3C2-TX is a potential replacement for transparent conductive oxide layer and Pt, frequently used in Dye-sensitized solar cell applications.