Abstract
With the increasing oil demand, more attention has been paid to enhancing oil recovery in old oil fields. CO2 flooding is popular due to its high oil displacement efficiency and ability to reduce greenhouse gas emissions. Laboratory experiments and on-site application cases have shown that the minimum miscibility pressure has a greater impact on CO2 flooding than other factors. If the reservoir pressure is below the minimum miscible pressure, then there is CO2 immiscible flooding. Both theoretical analysis and experimental results show that the recovery rate of CO2 miscible flooding is 2-5 times higher than that of immiscible flooding. If the reservoir pressure is increased by water flooding before CO2 injection, it is easily limited by the physical property parameters. Therefore, accurately determining and effectively reducing the minimum mixing pressure has become the focus of research. Currently, there are two types of methods for determining the minimum miscible pressure: experimental and theoretical methods. The experimental method is generally considered more accurate, including the slim tube test, rising bubble apparatus, and vanishing interfacial tension, etc. However, it is worth noting that the minimum miscibility pressure is dynamically changing, and there will be high economic costs if measured repeatedly through experimental methods during reservoir development. Therefore, it is recognized that the minimum mixing pressure can be determined at any time using theoretical calculation of initial data, which will reduce economic and time costs to a high degree. In this paper, the theoretical calculation method is divided into empirical correlation, state equation, and artificial intelligence algorithm. The techniques for reducing the minimum miscibility pressure can be classified into two categories: miscible solvents and surfactant methods. The miscible solvent method can be further divided into monocomponent and polycomponent methods. This paper compares the advantages and disadvantages of the existing techniques for measuring and reducing MMP and selects the best method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.