Comprehensive Review of Hydrothermal Pretreatment Parameters Affecting Fermentation and Anaerobic Digestion of Municipal Sludge

Abstract

Municipal solid waste treatment and disposal have become one of the major concerns in waste management due to the excessive production of waste and higher levels of pollution. To address these challenges and protect the environment in sustainable ways, the hydrothermal pretreatment (HTP) technique coupled with anaerobic digestion (AD) becomes a preferred alternative technology that can be used for municipal solid waste stabilization and the production of renewable energy. However, the impact of HTP parameters such as temperature, retention time, pH, and solid content on the fermentation of TWAS is yet to be well studied and analyzed. Hence this study was conducted to review the effect of hydrothermal pretreatment of thickened waste-activated sludge (TWAS) on fermentation and anaerobic digestion processes. Many studies reported that fermentation of TWAS at pretreatment temperature ranges from 160 °C to 180 °C resulted in a 50% increase in volatile fatty acid (VFA) yields compared to no pretreatment. However, for the AD process, HTP in the range of 175 °C to 200 °C with a 30–60 min retention time was considered the optimal condition for higher biogas production, with 30% increase in biodegradability and greater than 55% increase in biogas production. Even though there is a direct relationship between increased HTP temperature and the hydrolysis of TWAS, a pretreatment temperature range beyond 200 °C alters the biogas production. The solid content (SC) of sludge plays a crucial role in HTP, where in practice up to 16% SC has been utilized for HTP. Further, a combined alkaline-HTP enhances the process performance.