Comprehensive modeling of ignition and combustion of multiscale aluminum particles under various pressure conditions

Abstract

The ignition and combustion of aluminum particles are crucial to achieve optimal energy release in propulsion and power systems within a limited residence time. This study seeks to develop theoretical ignition and combustion models for aluminum particles ranging from 10 nm to 1000 μm under wide pressure ranges of normal to beyond 10 MPa. Firstly, a parametric analysis illustrates that the convective heat transfer and heterogeneous surface reaction are strongly influenced by pressure, which directly affects the ignition process. Accordingly, the ignition delay time can be correlated with pressure through the pb relationship, with b increasing from –1 to –0.1 as the system transitions from the free molecular regime to the continuum regime. Then, the circuit comparison analysis method was used to interpret an empirical formula capable of predicting the ignition delay time of aluminum particles over a wide range of pressures in N2, O2, H2O, and CO2 atmospheres. Secondly, an analysis of experimental data indicates that the exponents of pressure dependence in the combustion time of large micron-sized particles and nanoparticles are –0.15 and –0.65, respectively. Further, the dominant combustion mechanism of multiscale aluminum particles was quantitatively demonstrated through the Damköhler number (Da) concept. Results have shown that aluminum combustion is mainly controlled by diffusion as Da > 10, by chemical kinetics when Da ≤ 0.1, and codetermined by both diffusion and chemical kinetics when 0.1 < Da ≤ 10. Finally, an empirical formula was proposed to predict the combustion time of multiscale aluminum particles under high pressure, which showed good agreement with available experimental data.