Abstract
Thermochemical conversion process is one of the most promising routes to harness the potential of oil palm biomass as renewable energy alternative in Malaysia. Despite this potential, there is a lack of comprehensive study that characterises the complete spectrum of oil palm biomass. In this work, thermogravimetric-mass spectrometry (TG-MS) results of five oil palm biomass, i.e., oil palm trunk (OPT), palm kernel shell (PKS), oil palm frond (OPF), mesocarp fibre (MF) and empty fruit bunch (EFB), in pyrolysis and combustion conditions are presented and analysed. Kinetic studies on the TG data of these biomass were performed using Coats–Redfern integral method and Sestak–Berggren function to determine the activation energy and the reaction mechanism at different thermal decomposition stages. Pyrolysis of hemicellulose, cellulose, and lignin occurs at 140–331, 235–435, and 380–600 °C, respectively, while combustion of hemicellulose, cellulose, and lignin took place at 140–313, 225–395, and 372–600 °C, respectively. The activation energy was the highest for cellulose decomposition in both pyrolysis and combustion cases. Phase boundary reaction dominated during hemicellulose and cellulose decompositions, while nucleation dominated during lignin decomposition and char oxidation. MS results show that majority of the gases came out between 250 and 600 °C, mainly from CH4 and H2O in pyrolysis case and from CH4, CO2 and H2O in combustion case. Other than these major gases, NO, NO2 and SO2 were also generated although in much lower proportion compared to these gases. Based on TG-MS results, the best potential application for each biomass was also identified where OPT and OPF are suggested for gasification and fermentation, PKS for bio-char production and combustion, MF for bio-oil production, combustion, and bio-char production and EFB for bio-oil and bio-char production.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
