Abstract
To utilize computational techniques in investigate and evaluate the crashworthiness of typical fuselage section of a large transport aircraft in various crash scenarios, the finite element model of fuselage section was modeled and validated based on the vertical drop test of fuselage section at 6.02 m/s. The crash simulation analysis in various crash scenarios (such as concrete ground, soft soil grounds and water) were further conducted based on the validated model of fuselage section, and the crash response characteristics (deformation and failure mode, acceleration response and occupant injury risk, energy-absorbing characteristics) were analyzed and compared. The results show that the finite element model can accurately simulate the unrolling failure mode (three plastic hinges failure mode) of fuselage section and the failure of the connections of cargo floor crossbeams and fuselage frames, and it is in good agreement with the test results in terms of impact velocity and acceleration response. In the case of various soft soil grounds impact scenarios, the partial impact energy is absorbed by the soft soil ground, resulting in slightly different failure modes of fuselage section and a reduction in the peak acceleration. The water-entry impact failure mode of fuselage section is consistent with the rigid ground impact failure mode, the overall deformation degree of fuselage section decreases, but the degree of bending and upturning of fuselage frames increases with the increasing of the water-entry impact velocities The safety of occupants can be effectively protected in the soft soil ground and water-entry impact scenarios. The unrolling failure mode of fuselage section can be changed to the flattening failure mode (multiple plastic hinges failure mode) through the reasonable design to avoid the rupture of cargo floor crossbeams, and the more crash energy can be absorbed due to the production of more plastic hinges for the flattening failure mode, and the crashworthiness of fuselage section can be significantly improved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
