Comprehensive calibration and laboratory validation of a micro electromechanical system sensor-based flexible inclinometer

Abstract

Abstract Real-time monitoring of slopes, tunnels, and dams is important for ensuring the long-term stability and reliability of such structures. Despite the successes of current technologies in many applications, a gap still exists in certain areas such as precision in steep slopes and complex soil conditions. This study has designed a flexible inclinometer based on an array of Micro Electromechanical System (MEMS) sensors to enhance the accuracy and flexibility of existing monitoring techniques. The inclination angle of each flexible inclinometer measurement unit was measured to monitor the horizontal or vertical displacement of the target structural body. We used the Levenberg–Marquardt (LM) algorithm for optimizing the MEMS sensors based calibration and designed multiple experiments to test the accuracy of the proposed method. Experimental results show that the calibrated flexible inclinometer measurement unit has an inclination angle of less than 0.04° and the accuracy of the flexible inclinometer lies within ±0.4 mm in the horizontal attitude and 1.6 mm in the vertical attitude. Our research has developed a novel tool for geotechnical engineering monitoring that can aid in increasing the precision of real-time assessment and prediction of structural stability.