Abstract

The interest in nonthermal discharge plasma has recently increased over the last few decades due to the ability to generate new radicals at atmospheric pressure. This paper presents a comprehensive analysis of the dissociation processes and reaction rates of various water vapour samples by dielectric barrier discharge plasma (DBD). The influence of water contamination and the presence of ammonia (NH3) on hydrogen production from water vapour was investigated. A novel reaction rate expression was proposed to fit the plasma-water vapour experiment results. The hydrogen production and conversion rate of pure reverse osmosis (RO) water samples showed greater results than the contaminated water samples in all experiments at different tested bubbling temperatures. The higher conversion rate was obtained from RO water combined with 1%NH3 at a bubbling temperature of 50 °C and was 1.17%. The water contamination influenced the generated DBD plasma micro discharges, consequently decreasing the electron collisions, leading to lower water vapour conversion into constituent elements H2 and O2. It was also found that the influence of ammonia on the water vapour decomposition was related to the NH3 concentration. Moreover, the reaction rate showed good agreement with the experimental results. It was observed that the energy efficiencies were obtained at an operating temperature of 50 °C for pure RO, GTW, and CTW water samples enhanced by adding 1%NH3, for example, the RO energy efficiency value at a bubbling temperature of 50 °C increased from 0.133% to 1.15% because of more hydrogen was generated. It implies that the water vapour decomposition processes are influenced by the following parameters: input gas temperature, reaction time, plasma power, oven or reactor heating temperature, the separation method, sampling method, and sampling collection time.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call