Abstract
Continental shale oil can be divided into two categories according to vitrinite reflectance of kerogen: medium-high maturity (Ro > 0.9%) and medium-low maturity (Ro ≤ 0.9%). Due to high ratio of gaseous (C1-5) and light hydrocarbons (C6-14), high GOR and overpressure of the shale section, medium-high maturity shale oil has commercially productivity, which is considered as the target of unconventional resources in China. Shale oil composition is the basic and key parameter for resource evaluation, prediction of favorable areas, well location and field development plan. However, in shale oil composition research projects, the samples used and the analytical methods are quite different, and evaluation standard has not been established, which has restricted the exploration and exploitation of continental shale oil in China.To understand this effect, we took the first member of Qingshankou Formation (Late Cretaceous) in Songliao Basin in eastern China as the target section. The section develops pure shale oil at a burial depth of 2000-2500m, with vitrinite reflectance of kerogen (Ro) of 1.20%-1.70% and high clay minerals content (40 wt%-60 wt%). We performed four sets of experiments on molecular composition of shale oil, including oil produced from shale section, the full-closure coring shale, the conventional coring shale and extracted hydrocarbons of shale with chloroform. The crude oil and saturated hydrocarbons (extracted hydrocarbons) separated by chromatographic column were directly analyzed by gas chromatography. The full-closure coring and conventional coring shale samples were conducted TG-GC (thermogravimetry-gas chromatography) experiment, where the powder samples were thermally desorbed at 300 ℃ for 3 minutes.The experimental results show that carbon number of n-alkanes in crude oil is 4–38. The carbon number of n-alkanes in full-closure coring shale is 1–26, and it contains a large amount of gaseous and light hydrocarbons, accounting for up to 60 wt%–80 wt%. It is worth noting, however, that due to the loss of gas and light hydrocarbons in conventional coring, the carbon number of n-alkanes in conventional coring shale is 11–26, and the main peak carbon is 13–16. In the process of shale placement in core library, extraction and concentration, a large amount of hydrocarbons are lost. Through chromatographic analysis, carbon number of n-alkanes in saturated hydrocarbons is 15-38, and the main peak carbon is 18–22. C15- components are totally lost in extraction (Figure 1).The comparison data we assembled show that shale oil components obtained from different samples vary significantly, especially for medium-high maturity shale containing large amounts of gaseous and light hydrocarbons. The heavy hydrocarbon components (C15+) can be determined by combining the produced oil with extracted hydrocarbons, and the gaseous and light hydrocarbons retained in shale can be determined by combining the produced oil with TG-GC analysis for full-closure coring shale. Pressure-retained coring or full-closure coring is indispensable for obtaining shale oil components in place.Figure 1 (a) Gas chromatogram of oil produced from shale section; (b) TG-GC chromatogram of conventional coring shale sample; (c) TG-GC chromatogram of full-closure coring shale sample; (d) Gas chromatogram of saturated hydrocarbon extracted from shale sample.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have