Abstract
Problem statement: We have recently introduced several important improvements in the measurement of distillation curves for complex fluids. The modifications include a composition-explicit data channel for each distillate fraction and temperature measurements that are true thermodynamic state points that can be modeled with an equation of state. The composition-explicit information is achieved with a sampling approach that allows precise qualitative as well as quantitative analyses of each fraction, on the fly. We have applied the method (called the advanced distillation curve technique) to a variety of fluids, including simple n-alkanes, rocket propellants, gasoline, jet fuels, diesel and biodiesel fuels and crude oils (both petroleum-and bio-derived crude oils). Approach: In this study, we present the application of the method to new, recycled and resourced heavy oils. The ultimate purpose of this work is waste reduction and energy utilization, by placing the reprocessing steps on a more fundamental footing. First, we present measurements on four unused automotive crankcase oils and then four samples of used oils: automotive oil, cutting oil, transformer oil and a commingled lubricant waste stream. Using the advanced distillation curve metrology, we can distinguish between the different weights (viscosity ranges) of crankcase oils and compare them to the sample of used crankcase oil. The distillation curves also provide valuable information regarding the presence or absence of low-boiling contaminants in the recycled automotive oil, such as water and gasoline. Results: Additionally, we demonstrate the evaluation of all four used lubricant oils. Then, we apply the advanced distillation curve method to a sample of crude oil prepared using a plastic waste stream from an automotive plant. Conclusion: Overall, we conclude that the composition-explicit advanced distillation curve metrology is important for understanding the boiling behavior of the various oils streams and is a valuable diagnostic for future re-refining of the used lubricant oils. This information will be essential in the development of models for the thermophysical properties of such fluids.
Highlights
Lubricant oils: In the United States alone, over two hundred million gallons of used lubrication oil are disposed of improperly each year (American Petroleum Institute, 2009)
Given appropriate constraints and cautions, we find that the advanced distillation curve technique (ADC) is a useful tool for measuring the atmospheric distillation curve of heavier complex fluids such as oils
Enclosure heating was Automotive oils: Three commercially available commenced with a four-step program based upon a automotive crankcase oils were measured with previously measured distillation curve
Summary
Lubricant oils: In the United States alone, over two hundred million gallons (approximately 7.6×108 L) of used lubrication oil are disposed of improperly each year (American Petroleum Institute, 2009). The oil from one improperly disposed automotive oil change (4-5 L) can contaminate one million gallons of fresh water. It is quite clear, that proper collection of used lubricant oils is of great environmental importance. The majority of used lubricant oil that is generated is automotive crankcase oil (sometimes called drain oil). This oil can be recycled and treated for subsequent use as automotive oil, or used for other applications. The cleaned oil is hydrotreated, followed by the addition of an appropriate
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.