Abstract
This paper describes the composition and operation of a semi-virtual energy system and building emulator designed for studying hybrid grid interactions of a modern nearly-zero energy building. The system consists of a real part for energy production (PV panels and micro-wind turbine), storage (batteries and hot water storage tanks) and conversion (ground-source heat pump GSHP and electric heater) combined with a virtual part that models a single-family house in the computer simulation program TRNSYS. A Labview program is used for communication between the real and virtual parts. Measurement data from six periods selected for study between September 2015 and February 2016 are analyzed. The data indicate that during the study, the total electricity consumption was 1290 kWh, divided to 44/38/18% between household appliances, GSHP and electric heater, respectively. The local net production was 250 kWh, or 19% of the total demand. PV, which was heavily concentrated in fall, accounted for 54% of the production. Wind production was winter-centered. The electrical energy matching aspects of the system are represented with two indices: OEFe (on-site electrical energy fraction), the fraction of the building electrical demand covered by local production, and OEMe (on-site electrical energy matching), the ratio of the building’s self-consumption to the total local production. The matching capability of the energy system was found poor due to daily and seasonal mismatches between production and demand. The small net production compared to demand led to small OEFe and large OEMe values overall.
Highlights
Buildings account for roughly 40% of the total energy use within the European Union (European Commission, 2017a)
The system consists of a real part for energy production (PV panels and micro-wind turbine), storage and conversion combined with a virtual part that models a single-family house in the computer simulation program TRNSYS
In this study, the performance and energy matching features of a semi-virtual nearly-zero energy building emulator platform located at Aalto University in Espoo, Finland were evaluated during the first phase operation of the project
Summary
Composition and Operation of a Semi-Virtual Renewable Energy-based Building Emulator. This paper describes the composition and operation of a semi-virtual energy system and building emulator designed for studying hybrid grid interactions of a modern nearly-zero energy building. The system consists of a real part for energy production (PV panels and micro-wind turbine), storage (batteries and hot water storage tanks) and conversion (ground-source heat pump GSHP and electric heater) combined with a virtual part that models a single-family house in the computer simulation program TRNSYS. The data indicate that during the study, the total electricity consumption was 1290 kWh, divided to 44/38/18% between household appliances, GSHP and electric heater, respectively. The electrical energy matching aspects of the system are represented with two indices: OEFe (on-site electrical energy fraction), the fraction of the building electrical demand covered by local production, and OEMe (on-site electrical energy matching), the ratio of the building’s self-consumption to the total local production.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
