Abstract
Calcium carbonate (CaCO3) is used as filler in poly(vinyl acetate)(PVAc) composites to enhance the mechanical properties. The filler is often commercially surface treated with stearic acid to optimize the interfacial bonding and wetting. The effects of the interface on properties were studied using scanning electron microscopy (SEM) of films with initial and deformed morphologies. Plasticizing additives cause a significant change in the appearance of the films and a reduction in the glass transition temperature of the matrix from 40°C to ≈ 18°C, which was not altered by further addition of the filler. A PVAc composite fracture surface shows the particles adhering well to the matrix, suggesting good adhesion and reinforcement. The SEM study is complemented by WAXD, SEM/X-SEM, XPS, and thermal analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.