Abstract
The paper presents the results of tests on an “intermetallic layer TiAl / coating AlCrTiN" hybrid layer, which was obtained using a hybrid method combining magnetron Sputtering, diffusion, and arc evaporation in a single technological process. The hybrid layer obtained was subjected to studies on morphology and chemical composition using the TM3000 scanning electron microscope. Additionally, hardness and Young's modulus as a function of distance from the surface were measured using a nanohardness tester CSM. Based on the analysis of the results obtained, the authors suggest the mechanism of layer growth in the technological process. The composite layer was also subjected to wear resistance using the ball-cratering method and erosion resistance tests using the glass powder. The obtained results showed that the Ti-Al intermetallic / AlCrTiN hybrid layer significantly increases resistance to abrasion as well as erosion wear resistance of the Ak12 alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
