Composite Delta Beam for Slim Floor Construction

Abstract

Abstract: The structural behaviour of the composite Flush Beam for slim floor as a whole has been investigated. The deformation behaviour of the structural members Steel beams with trapezoidal cross-sections and specially punched webs were developed as composite beams in slim floors. The estimation of the flexural stiffness and bending capacity of composite slim beams is rather complicated, because the influence of many factors should be taken into account. These factors include variable section dimensions, Profile of the beam, stiffness of the beam and interaction between steel and concrete. In this paper, analytical investigations have been conducted to investigate the deflection behaviour of Flush beam specimens under monotonic loading. A design procedure is developed for composite slim floor Flush beams based on cross-sectional analysis and the flexural properties of the slim floor beams are evaluated. From the analytical investigation it was found that the deflection of delta beam is 48% less than the conventional I-beam More over the stiffness of the Delta beam is 49.8% higher than the I-beam