Abstract
Introduction. In metallurgy, the final stage of production is metal processing in rolling shops. The main component of the development of technologies for rolling graded profiles is the calibration of rolls. 90% of the steel that is smelted is processed by rolling. Rolling mill calibration methods are constantly being improved. Calibration methods are used in which there is a significant uneven deformation of the profile elements, which leads to rapid wear of the rolls and an increase in costs. Formulation of the problem. It is necessary to develop a method of calibrating rolls in the production of channels based on the reduction of deformation unevenness. Goal. The purpose of the article is to analyze the methods of calibrating rolls for the production of channels with an indication of their advantages and disadvantages and to justify the application of the components of the developed method of calibrating rolls based on the reduction of unevenness of deformation. The results. The analysis of various methods of calibrating channel rolls showed that the smallest unevenness of deformation is present in the method of rolling by the bending method. The greatest uniformity of deformation along the width of the profile is achieved, the wear of the rolls is reduced in connection with ensuring a minimum difference in the diameters of the rolls in the gauge, and energy costs are reduced. To reduce the uneven deformation of the metal, it is suggested to use a rectangular blank or strip. Scientific novelty. For the first time, the methods of calibrating rolls for channel rolling were analyzed in detail. To reduce uneven deformation of shelves and flanges in the center of deformation in the gauge, it is proposed to use the bending calibration method. It is proposed to use strips as a blank for the first time. Practical meaning. The application of channel rolling technology based on the developed method of calibrating rolls with reduced unevenness of deformation in the first passes allows to reduce the cost of products and give an economic effect
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Reporter of the Priazovskyi State Technical University. Section: Technical sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
