Abstract
This paper proposes non-fragile compliant humidity sensors that can be fabricated inexpensively on various types of nano-porous polymer membranes such as polycarbonate, cellulose acetate, and nylon membranes. The sensor contains a pair of interdigitated electrodes deposited on the nano-porous polymer membranes. The resistance and/or capacitance between these electrodes vary at different humidity levels with a very high sensitivity due to the water adsorption (capillary condensation) inside the nano-pores. The proposed sensors are low-cost in both material and fabrication. Due to its compliance, the sensors can be suitable for certain applications such as in-situ water leakage detection on roofs, where people can walk on top of them. Testing results demonstrated that the sensor changes resistance within large range of humidity values. For most sensors, the resistance changes from 0.1 GΩ to 2000 GΩ when the relative humidity changes from 39% to 100% at room temperature. It takes about 4–8 minutes for the resistance to reach steady state when the sensor was taken from 100% to 39% relative humidity at the room temperature.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
