Compensation of uncertain continuous systems by using the internal model control principle

Abstract

In this paper the design of compensators for uncertain continuous plants is investigated. The standard derived compensators are based on the application of the internal model control (IMC) method. The required a priori knowledge on the plant is rather weak, namely, an upper bound of the plant relative order, the numbers of the strictly unstable and critically unstable plant poles being integrators and upper and lower bounds of the amplitude-versus-frequency plot over the low frequency band in the case of minimum-phase open-loop systems. If the open-loop system has unstable zeros and/or poles then the above bounds are required to be known for a modified magnitude plot which substitutes the unstable zeros (poles) by stable poles (zeros) which are their complex-conjugate reflections on the left-hand plane. An absolute upper bound of the open-loop phase plot is obtained on a finite frequency interval which allows the closed-loop system to guarantee a prescribed relative stability in many practical situations. The method is dependent on the alternative design of phase lead/lag classical compensators and to indirect adaptive control situations where the adaptive identifier is used for the parametrization of the adaptive controller.