Abstract
In this paper, we investigate the influence of temperature on the transverse force response of polymer optical fiber Bragg gratings (POFBGs) inscribed in cyclic transparent fluoropolymers (CYTOPs). The gratings are imprinted in the fiber using the direct-write, plane-by-plane femtosecond laser inscription method. The temperature increase leads to a decrease in the polymer Young's modulus, which causes a sensitivity variation in the POFBG sensor for transverse force applications. The proposed technique is based on the characterization of both the sensor's response offset and the material's Young's modulus variation due to the temperature increase. Transverse force tests were performed at different temperatures (30 °C, 40 °C, 50 °C, and 60 °C) and the compensated and uncompensated responses are compared in terms of root mean squared error (RMSE). The compensated results show an RMSE lower than 3% (mean value between all tested temperatures), which is 6.7 times lower compared with the uncompensated response. In addition, the proposed compensation technique presents a maximum RMSE reduction of 16 times at 60 °C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
