Abstract
Fe-Cr-W based low activation ferritic steels are widely regarded as promising blanket structural materials for fusion reactors, while liquid lithium breeder/coolant concept provides an attractive option for high efficiency and simplicity of blanket system. However, past compatibility tests of ferritic steels with liquid lithium were almost limited to conventional Fe-Cr-Mo steels. In this study, the corrosion behavior of the candidate reduced activation ferritic steel, JLF-1(Fe-9Cr-2W-0.1C) in lithium was investigated. Static immersion tests were carried out using coupon specimens (16 × 4 × 0.25 mm) at 873K and 973K for 100hr. At 973K, the phase transformation from martensite to ferrite resulted in decrease in hardness from 250 to 140Hv. This seemed to be caused by depletion of C. Examinations of binary Fe-Cr and pure iron were also carried out for comparison with JLF-1.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.