Abstract
Comparative study on permanganate and ozone as pre-oxidation agents were performed on pilot scale with traditional drinking water treatment process, chemical oxygen demand (COD), total organic carbon (TOC), UV254, turbidity, trihalomethane formation potential (THMFP) were examined at each reactor’s effluent. The results show that at pre-oxidation reactor, the total organic remained stable after by the two agents, while for UV254, pre-ozonation has a removal rate of 34%, comparing that of 17% by permanganate. At the sedimentation process, 0.4 mg/L permanganate improves the removal rate of turbidity and COD by 0.99 % and 8.4%, respectively; while a positive COD removal of 11.8 % was achieved by 0.9 mg/L pre-ozonation, and an average of-10.08% turbidity removal was achieved at applied dosage (0.5, 0,9 and 1.5 mg/L), which can be made up for in the followed sand filtration reactor. Both permanganate and pre-ozonation show higher removal rate of THMFP for the finished water.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
