Abstract
Both the microstructure and wear behavior of GCr15 bearing steel prepared by selective laser melting (SLM) and electron beam melting (EBM), respectively, are compared for the first time in this study. The results show that the microstructure of SLMed-GCr15 bearing steel is composed of residual austenite and fine martensite and EBMed-GCr15 bearing steel is mainly globular pearlite, the globular cementite precipitated in the ferrite surface is fine (80 ~ 400 nm) and uniformly distributed. The Vickers hardness of the samples prepared by SLM is 750.0±17.1 HV0.2, the coefficient of friction (COF) and wear rate are 0.5082 and 24.6±3.2 μm3N−1m−1, respectively, and the wear mechanism is mainly adhesive wear. The sample prepared by EBM has the lowest COF and wear rate, which is 0.4647 and 18.4±1.7 μm3N−1m−1, respectively, and the wear mechanism is mainly abrasive wear and adhesive wear, which shows excellent friction resistance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
