Abstract
Substrate wettability is an important factor in determining effective and efficient irrigation techniques for container-grown crops. Reduced substrate wettability can lead to lower substrate water capture, excessive leaching and poor plant growth. This research examined substrate water capture using surface and subirrigation under three initial moisture contents (IMC). Sphagnum peat moss, coconut coir, and pine bark were tested at IMCs of 67% 50%, and 33%. Substrate water capture was influenced by both IMC and irrigation technique. Surface irrigation increased the water capture of coir and peat, regardless of IMC, whereas IMC influenced pine bark water capture more than irrigation method. Surface-irrigated coir at or above 50% IMC provided the greatest water capture across all treatments. The first irrigation had the highest capture rate compared to all other events combined. Container capacities of pine bark and coir were unaffected by IMC and irrigation type, but the CC of peat was less by ~ 40% volumetrically under low IMC conditions. Coir, had the greatest ability to capture water, followed by pine bark and peat, respectively. Moisture content, irrigation type and component selection all influence the water capture efficiency of a container substrate.
Highlights
Water use efficiency of horticultural soilless substrates represents one of the biggest variables in container plant production
Coir represented the substrate with the highest percentage of particles smaller than 2.0 mm, representing 93.8% of all particles tested while pine bark showed the highest percentage of coarse particles with a value of 53.6%
The volumetric water content (VWC) curves for coir (Figure 4A–C) indicated a pattern directly related to initial moisture contents (IMC)
Summary
Water use efficiency of horticultural soilless substrates represents one of the biggest variables in container plant production. U.S, representing a 148% increase since 1998, growers specializing in container plant production need to be able to understand how irrigation specifics impact water use efficiency of soilless substrates [1]. In order for growers to meet these increasing regulations in water use, we need to increase the overall understanding of irrigation techniques. Two parameters affecting water efficiency in substrates are container capacity (CC) [9,10,11,12] and wettability [13,14,15,16,17]. Both wettability and CC are vital to the wetting of a substrate, neither
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.