Abstract
Membrane distillation (MD) is an emerging separation process suitable for desalination of brackish or seawater. In this technique, hydrophobic membranes are required to allow only water vapour permeation through the porous barrier. In this work, zirconia and titania ceramic membranes with pore diameters of 50 nm (Zr50) and 5 nm (Ti5), respectively, were chemically modified to change their hydrophilic feature into hydrophobic one by grafting of the C 8F 17(CH 2) 2Si(OC 2H 5) 3 perfluoroalkylsilane molecule (C8). Water contact angles around 160° were measured, indicative of highly hydrophobic membranes. Desalination of NaCl solutions of 0.5 and 1 M was performed using three MD configurations, AGMD, DCMD and VMD methods, with the aim to compare their efficiency. High salt rejection rates higher than 99% were obtained in all investigated configurations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.