Abstract
Prestressed concrete is internal stresses of appropriate magnitude and distribution are given in such a way that the stresses caused by external loads are resisted to a desired level. The use of prestressed concrete is mostly applied in bridge construction, especially in the bridge girders. During the stressing girder process, grouting is carried out to prevent the anchor from slipping. The strength of the adhesion of the grouting material used determines the homogeneous nature and whether the prestressed concrete section next to it can meet the anchor load. If the bond strength does not meet the requirements, it will cause slippage in the anchors which will ultimately affect the strength of the prestressed concrete structure due to quite large prestress losses due to slippage. The method used is to test the adhesive strength of the strands that have been grouted with f.a.s. 1:3 using each grouting material such as PCC (Portland Composite Cement), PPC (Portland Pozzoland Cement), OPC (Ordinary Portland Cement) and Sika Grout 215 which is then compared with the grouting material that adheres best. The results obtained were Sika Grout 215 bond strength of 3.6629 MPa, PCC bond strength of 3.2986 MPa, PPC bond strength of 2.5743 MPa and OPC bond strength of 2.307MPa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.