Comparison of the specific energies of sinusoidal VCS cutter rings and CCS cutter rings in breaking rock-like materials based on the FEM.

Abstract

Disc cutters are essential for full-section hard-rock tunnel boring machines. The performance of these devices directly affects tunnel engineering costs and duration. This paper proposes a sinusoidal variable cross-section (VCS) cutter ring and design method and establishes a digital model. Rock-like materials are simulated with a finite element model, and the model validity is verified via rock simulation mechanics tests. A disc cutter rolling rock simulation model for a linear cutting machine is also established, and simulation tests are performed for single- and three-cutter rolling using sinusoidal VCSs and constant cross-section (CCS) cutter models, respectively. The stress and energy changes for the cutters and rock-like material damage area were compared via simulation, confirming that some sinusoidal VCS cutter rings do less work on rock-like materials and cause larger crushing areas under the same engineering parameters; therefore, these cutter rings have smaller specific energies. The sinusoidal VCS cutter ring performance is 7% greater than that of CCS on average under single-cutter simulation, and the intermediate cutter performance of the intermediate cutter is 9% greater than that of CCS on average under three-cutter simulation. Thus, sinusoidal VCS cutter rings offer improved rock damage performance, and further research and application of this technology will improve the working efficiency of tunnel boring machines.