Abstract
In this work we present a comparison of the properties of three tin selenide (SnSe) thin films synthesized by electrodeposition under air or nitrogen atmosphere. The films were synthesized at -0.7 V, -0.8 V, and -0.9 V vs. Ag/AgCl using a fluorine doped tin oxide conductive glass as working electrode, a silver chloride electrode as reference electrode, and a platinum mesh as counter electrode. After the electrodeposition, films were heated at 55°C for 30 minutes in air atmosphere. Films without and with thermal treatment were characterized by UV-Visible Spectroscopy, Atomic Force Microscopy, and Raman Spectroscopy. Analyzing the results, it was found that the optimal conditions for the electrodeposition were at -0.8 V vs Ag/AgCl. Band gap values were in the range from 1.2 to 1.5 eV. Raman spectroscopy revealed characteristic vibrational modes of SnSe and SnSe2 materials. The analysis by Atomic Force Microscopy revealed grain size of 100-700 nm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.