Abstract
The effect of the addition of 5 at. pct boron on the microstructure and creep behavior of a nominally Ti-22Al-26Nb (at. pct) alloy was investigated. The boron-modified alloy contained boride needles enriched in titanium and niobium, and because to these borides, this material was considered to be a discontinuously reinforced metal matrix composite. These needle-shaped borides made up to 2 pct of the volume and were up to 158-μm long and 22-μm wide. The effect of boron on the mechanical properties was evaluated through in-situ creep testing and tensile testing at room temperature (RT) and 650 °C. Overall, the addition of 5 at. pct boron proved to be detrimental to the tensile and creep behavior. The composite exhibited a brittle failure and lower elongations-to-failure than the monolithic material. The in-situ tensile and creep experiments revealed that the deformation process initiated in the boride needles, which cracked extensively, and significantly greater primary creep strains and creep rates were exhibited by the composite.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
