Abstract

TLC (thin-layer chromatography) and HPTLC (high-performance thin-layer chromatography) in normal (NP) and reversed (RP) phase systems were combined with densitometry to analyze caffeine, propyphenazone, and paracetamol. This work aims to check whether comparable limit of detection (LOD) values can be obtained on TLC and HPTLC plates. Analyses were performed on five (NP) or four (RP) different stationary phases (chromatographic plates), testing, in both cases, three mobile phases. It is shown that by using both TLC and HPTLC plates, it is possible to develop chromatographic conditions that enable the detection of compounds analyzed in amounts ranging from a dozen to several dozen µg/spot. In the RP system, lower LOD values for all tested compounds were obtained using TLC than HPTLC. However, performing analyses in the NP, similar (of the same order) LOD values were obtained for caffeine, propyphenazone, and paracetamol when using both TLC and HPTLC plates. For example, during the NP-HPTLC analysis using silica gel 60F254 plates (#1.05548) and mobile phase B (n-hexane—acetone—ammonia, 25:25:0.5, v/v/v), LOD values for caffeine, propyphenazone, and paracetamol were 0.010, 0.046, and 0.030 μg/spot, respectively. During NP-TLC analysis using silica gel 60F254 (#1.05554 plates) and the mobile phase C (chloroform—toluene—ethyl acetate—methanol—80% acetic acid, 18:18:7.5:6:0.3, v/v), the values of LOD were 0.054, 0.029, and 0.016 μg/spot, respectively. During RP-TLC analysis using TLC RP-18F254 plates (#1.05559) and mobile phase F (methanol-water, 40:10, v/v), the LOD values were 0.019, 0.024, and 0.053 μg/spot, respectively. Therefore, for economical reasons, TLC plates should be recommended for analyses of caffeine, propyphenazone, and paracetamol, which are several times cheaper than HPTLC plates.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.