Abstract
This study investigates the correlation between the microstructure and the mechanical strength of AM60 magnesium alloy processed by equal channel angular pressing (ECAP) and multi-directional forging (MDF) at a constant temperature of 220 °C. The maximum number of passes was six for both severe plastic deformation (SPD) techniques. The minimum achievable grain size was ~1.9 μm for ECAP while it was only ~2.7 μm for MDF. Despite the monotonous reduction of the grain size, the yield and the ultimate tensile strength values decreased for high equivalent strains which was attributed to the decrease of the dislocation density. The maximum achievable strength was higher for ECAP than that for MDF mainly due to the higher dislocation density. Both ECAP and MDF processing led to an improvement of ductility. Based on the strength results, it is evident that the ECAP process is more effective in improving the mechanical properties of AM60 alloy at 220 °C, compared to the MDF process.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
