Comparison of the effects of antimony trioxide and zinc, calcium and copper stannates on the thermal degradation of polyamide-6,6

Abstract

Thermal and thermo-oxidative decompositions of polyamide 6.6 (PA66) in the presence and absence of zinc (ZnSt), calcium (CaSt) and copper stannates (CuSt), and in the presence of antimony trioxide (ATO), have been studied by TGA-FTIR and pyrolysis GC/MS. It is shown that whilst ATO has a negligible effect on the rate of decomposition and products of pyrolysis under both slow heating on a TGA and rapid heating on a pyrolysis/GC/MS apparatus, the stannates have a catalytic effect in the order ZnSt ≈ CaSt > CuSt, evident through release of volatiles at a lower temperature and in a different product distribution following rapid high temperature pyrolysis. In particular, rapid pyrolysis at high temperature in the presence of the stannates promotes formation amongst the pyrolysis products of, for example, 6-aminohexanenitrile. 1,6-hexanediamine, 1-methyl-3-formylindole and 1,2,3,7-tetramethylindole, whilst yields of others are reduced, e.g., hexanedinitrile, caprolactam, diaminomethylidene(2-hydroxypropyl)azanium, prop‑2-enenitrile (acrylonitrile) and azacyclodecan-5-ol. We suggest that these effects arise from complexation of the electropositive metal in the stannate (Zn, Ca or Cu) with the C=O groups of PA66, thus weakening the C(O)-C and C-N bonds adjacent to the C=O groups. The fact that ZnSt has the most pronounced effect on the pyrolysis product distribution and CuSt the least, we explain in terms of the order of electropositivity of the metal (Zn>Ca>Cu).