Comparison of single-phase isotropic elastic and fibril-reinforced poroelastic models for indentation of rabbit articular cartilage

Abstract

Classically, single-phase isotropic elastic (IE) model has been used for in situ or in vivo indentation analysis of articular cartilage. The model significantly simplifies cartilage structure and properties. In this study, we apply a fibril-reinforced poroelastic (FRPE) model for indentation to extract more detailed information on cartilage properties. Specifically, we compare the information from short-term (instantaneous) and long-term (equilibrium) indentations, as described here by IE and FRPE models. Femoral and tibial cartilage from rabbit (age 0–18 months) knees ( n=14) were tested using a plane-ended indenter (diameter=0.544 mm). Stepwise creep tests were conducted to equilibrium. Single-phase IE solution for indentation was used to derive instantaneous modulus and equilibrium (Young's) modulus for the samples. The classical and modified Hayes’ solutions were used to derive values for the indentation moduli. In the FRPE model, the indentation behavior was sample-specifically described with three material parameters, i.e. fibril network modulus, non-fibrillar matrix modulus and permeability. The instantaneous and fibril network modulus, and the equilibrium Young's modulus and non-fibrillar matrix modulus showed significant ( p<0.01) linear correlations of R 2=0.516 and 0.940, respectively (Hayes’ solution) and R 2=0.531 and 0.960, respectively (the modified Hayes’ solution). No significant correlations were found between the non-fibrillar matrix modulus and instantaneous moduli or between the fibril network modulus and the equilibrium moduli. These results indicate that the instantaneous indentation modulus (IE model) provides information on tensile stiffness of collagen fibrils in cartilage while the equilibrium modulus (IE model) is a significant measure for stiffness of PG matrix. Thereby, this study highlights the feasibility of a simple indentation analysis.