Comparison of Serpentine and Interdigitated Monopolar Plates on the Performance of an Anion Exchange Membrane Fuel Cell By CFD

Abstract

The continuous energy demand and the growing population have focussed the scientific research on developing alternative energy sources or green fuels.The anion exchange membrane fuel cell (AEMFC) arises as an excellent alternative because of its low-cost electrocatalyst used at the cathode, energy production, and no pollutants emissions to the environment. Nowadays, several studies have been conducted to improve the performance of the AEMFC modifying membrane materials, types of gas diffusion layers (GDL), and catalysts, among other cell components.However, the design of the flow channels by changing plate topologies and materials is still under development. About flow channels topologies, conventional geometries array (pin, straight, parallel, and serpentine) flow fields lead the flow in the direction parallel to the electrode surface, and the reactive gas flow towards the catalyst layer (CL) mainly by molecular diffusion. On the other hand, interdigitated flow fields provide convection velocity normal to the CL and forced convection flow in GDL for better mass transfer. The interdigitated flow fields could prevent water flooding and improve high current density operations performance.These flow fields have been tested in proton exchange membrane fuel cells (PEMFC) with excellent results at low current densities. Nonetheless, there is an essential balance and management of water in an AEMFC. It presents simultaneous production and consumption of water in anode and cathode, respectively, where the production is twice the consumption.Poor water management could provoke anode flooding or membrane drying. These scenarios are undesirable due to mass transport limitations, membrane polymer degradation, and cathodic channels flow can be flooded. Therefore, an appropriate design of flow field that allows the correct water balance on AEMFC is needed for optimal performance. This research deals with the computational fluid dynamic (CFD) comparison of serpentine and interdigitated flow fields on the performance of an AEMFC. For the development of this model, the Navier-Stokes and Brinkmann equations were implemented for momentum transfer. In addition, the average mixture model represents the transport of chemical species, and the Butler-Volmer equation denotes the electrochemical reaction at the CL; water balance is analyzed at low and high current densities to evaluate the scenarios above mention.Preliminary results indicate that a serpentine design is functional at the anode due to the water management is favored. An interdigitated flow field is implemented at the cathode to improve the distribution of the reactants from channels until the CL.