Abstract

Drinking water production facilities are designed to filter contaminants that are ever-present in raw water. These facilities, however, pose risks of tap water contamination or water supply discontinuation in the event of a massive chemical spill. A managed aquifer recharge (MAR) offers the advantage of purifying surface water as well as maintaining water underground for extended periods of time, thus securing sufficient time for a response to contaminant infiltration and dramatically increasing consumer safety. However, contaminated aquifers are difficult to recover; accordingly, it is important that MAR sites engage in preemptive responses to chemical spills in order to protect their aquifers. This study assesses potential risks in order to quantify the detrimental impacts of chemical spills in cities located in river basins on drinking water supply facilities. The targets of analysis are two MAR sites in South Korea. The potential risk analysis offers grounds upon which aggressive basin management can be implemented to ensure water supply facility operation safety. The lack of data for available for analysis is addressed using a stochastic methodology that ranks cities in which MAR sites are endangered based on the cities’ potential risk probability distributions. The results of the analysis show that water supply facilities surrounded by larger cities have relatively higher potential risks, and would, therefore, need to handle more management targets to prevent chemical spills. Furthermore, the proposed methodology contributes not only to potential risk management of existing water supply facilities, but also to MAR site selection.

Highlights

  • Today’s water purification technologies have sufficiently advanced to convert seawater and wastewater into drinking water

  • This study presented a new paradigm in that it proposes drinking water supply facilities be directly involved in river basin management

  • In order to supply tap water at reasonable prices, drinking water supply facilities have optimized purification processes. As a result, such facilities have become susceptible to raw water contamination resulting from chemical spills

Read more

Summary

Introduction

Today’s water purification technologies have sufficiently advanced to convert seawater and wastewater into drinking water. Their high unit costs of production continue to prevent these technologies from becoming more available to the general public. A typical water treatment system uses processes, such as sedimentation, filtration, and chlorine disinfection, to treat raw water from rivers and lakes to satisfy specified minimum standards. Ordinary water treatment systems are economically designed to withstand water quality fluctuations brought on by year-round natural environment changes, as well as ever-present pollutants. General filtration systems are susceptible to water quality changes resulting from accidents. Despite the availability of purification systems, citizens were detrimentally affected by a chemical spill in the Rhine River in 1986 [1], phenol leaks in the South Korean Nakdong River in

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call