Abstract
The mud-to-cement conversion or 'slag-mix' technology displays several advantages when compared to conventional well cementing operations. This alternative method means to combine drilling fluids, accelerators, and finely granulated slag as the hydraulic material. Steam injection is commonly used to improve crude oil production in the Lagunillas field (state of Zulia, NW Venezuela). This work compares the use of two slag-mix systems containing two polymer-based drilling muds during cementing of injection wells: an aqueous drilling fluid and an oil-in-water emulsion mud. After comparing the use of the two study drilling mud systems with a typical lignosulfonate slag-mix system, it can be stated that both systems may be suitable to be used in the application of the mentioned-above technology in steam stimulated wells. The aqueous formulations under study and a typical slag-mud slurry containing lignosulfonate show relatively similar values for most physic-mechanical properties. In contrast, the slag-mix emulsion system under consideration shows distinctive rheological and filtration behaviours compared to the other study polymer-based slag-mud slurry, but similar mechanical properties. [Received: April 26, 2019; Accepted: August 1, 2019]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Oil, Gas and Coal Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
