Comparison of Physical Model Tests With a Time Domain Simulation Model of a Wave Energy Converter

Abstract

Development of wave energy conversion systems may yield many key benefits for society such as the production of electrical power or fresh water for remote communities. However, complex ocean dynamics make it difficult for technology developers to not only address the stability and survivability of their systems, but also to establish energy conversion rates that are fundamental to proving economic viability. Building physical prototypes presents many challenges in terms of cost, accessible facilities, and time requirements. The use of accurate numerical modelling and computer simulation can help guide design and significantly reduce the number of physical prototype tests required and as a result play a primary role in the development of wave energy conversion systems that have to operate in challenging marine environments. SurfPower is an ocean wave energy converter (WEC) that converts wave motion into useful energy through surge and heave motion of a point absorber. The system pumps seawater into a high pressure hydraulic network that generates electricity via a turbine or freshwater via desalination at a facility onshore. The system is nonlinear due to the significant change in draft and mooring reaction load through the energy capture cycle of the device. This makes the use of nonlinear time domain simulation ideal for analysis and design of the system. Furthermore, utilizing a simplified nonlinear hydrodynamic model available in the time domain results in a practical early-stage design tool for system refinement. The focus of this work is to compare the results of scale model testing completed at the Institute for Ocean Technology in St. John’s, Newfoundland, with results produced from an equivalent system simulated in the time domain simulation software ProteusDS. The results give an assessment of the range of error that can be used to assess other experiments of the SurfPower WEC at full scale.