Abstract
Partial discharge (PD) resistance was evaluated for several kinds of nanocomposites. Following experimental results were obtained. Epoxy is stronger in PD resistance than polypropylene. But the enhancement of PD resistance by nano filler addition is higher for polypropylene that for epoxy. Silica and alumina nano fillers exhibit stronger PD resistance than layered silicate, when they are added into epoxy resins. Coupling agents or modifiers will help increase PD resistance. Similar level of the effect can be obtained for both cases of 5 wt% nano filler added epoxy and of 65 wt% micro filler loaded epoxy. Nano-micro composites are the strongest of all tested specimens as PD resistance. The above two experimental facts can be understood from the concept that the shortening of inter-particle distance is effective to reduce PD erosion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.