Comparison of Methods for the Sulfur Compounds and Elemental Sulfur Analysis in High-Sulfur Natural Gas

Abstract

Some gas fields with high hydrogen sulfide content, such as Luojiazhai, Dukouhe and Puguang Gas Fields, are found in Northeast Sichuan. For exploring and utilizing high sulfur natural gas reservoirs, it is essential to quantificational analysis of sulfur compounds and elemental sulfur in high sulfur natural gas. Determination of hydrogen sulfide content in natural gas with a laser method has many advantages, including on-site measurement, fast response, wide application scope, high accuracy, high reliability, and low maintenance. When the hydrogen sulfide concentration is 1% to 20%, the relative deviation of the analysis value to the standard value is less than 3% with repeatability of less than 1%. Determination of sulfur compounds in natural gas by gas chromatograph with sulfur chemiluminescence detector (SCD) also has many advantages, such as it is simple, fast, accurate and free from interference of most sample matrixes. The analysis method has good repeatability with lower limit of detection. Since SCD has liner equimolar response to sulfur atom, only one reference gas mixture of sulfur compound is used as external standard calibration. Determination of total sulfur content in natural gas with oxidative microcoulometry method has good repeatability and high accuracy. Determination of elemental sulfur by liquid chromatography has repeatability better than 3%, the detection limit is 10mg/m3, and recovery rate of over 90%, and is applicable for determination of elemental sulfur content in high sulfur natural gas.