Abstract

BackgroundThe posterior medial meniscal root tear (PMMRT) seriously impacts the tibiofemoral joint biomechanics. Two available techniques for PMMRT repair include the transtibial pullout (TPO) repair and all-suture anchor (ASA) repair techniques. These techniques have not been compared biomechanically.MethodsA total of 20 fresh porcine cadaveric knee specimens were used. All 20 knees were randomly and evenly distributed into four groups (five specimens per group): (1) intact posterior meniscal root, (2) PMMRT, (3) TPO repair technique for PMMRT, and (4) ASA repair technique for PMMRT. The tibiofemoral contact mechanics were investigated using a pressure sensor. All knee specimens were tested by being loaded with 600 N axial compressive force at three different flexion angles (0°, 45°, and 90°). The contact surface area, contact pressure, peak pressure, and time-zero displacement were recorded.ResultsThe PMMRT caused a significant decrease in contact surface area, an increase in contact pressure, and peak pressure from the reference values observed in the intact meniscus group (P = 0.05, 0.016, and 0.008, respectively). After fixation, no significant difference was observed between the ASA and intact group. Meanwhile, significant differences were found between the TPO and intact group in terms of contact surface area, contact pressure, and peak pressure. In the comparison between the two techniques, the ASA group demonstrated higher contact surface area than the TPO group at the average knee flexion angle (p = 0.05).ConclusionFor most testing conditions, the ASA technique demonstrated superior biomechanical property in terms of contact surface area compared with the TPO technique under compressive loading conditions. The ASA technique could also restore the tibiofemoral contact mechanics to be comparable with those of the native intact knee. Meanwhile, a significant difference in tibiofemoral mechanics, compared with the intact knee, could be observed in the TPO technique.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call