Abstract
This work presents the investigation results of laser remelting and alloying especially the laser parameters and its influence on the structure and properties of the surface of the 32CrMoV12-28 hot work steel, using the high power diode laser (HPDL). As a result structure changes in form of fragmentation were determined. The reason of this work was to determine the optimal laser treatment parameters, particularly the laser power to achieve good layer hardness for protection of this hot work tool steel from losing their work stability and to make the tool surface more resistant to action in hard conditions. For alloying the tantalum carbide, tungsten carbide and vanadium carbide powders were used. For investigations hardness measurements of the different remelting areas were performed. The remelted layers which were formed in the surface of investigated hot work steel were examined metallographically and analyzed using light and electron microscope. Three phases of carbides, TaC, VC and WC, were observed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
