Comparison of Liquid Sodium Heparin Syringe and Preheparinised Syringe for Sample Rejection in Arterial Blood Gas Analysis: A Cross-sectional Study

Abstract

Introduction: In hospital settings, Arterial Blood Gas (ABG) analysis is a routine investigation. Many errors can arise in the process, with 70% of errors in ABG analysis occurring during the preanalytical phase. Liquid heparin is commonly used as an anticoagulant in sample collection devices for Blood Gas (BG) analysis; however, inadequate heparin concentration and improper mixing of blood samples after collection often lead to incorrect results. This can be prevented by using syringes preloaded with lyophilised heparin. Aim: To monitor the prevalence of sample rejection collected by the device using liquid sodium heparin and calcium-balanced dried lithium heparin. Materials and Methods: This cross-sectional study was conducted at the ABG laboratory, Department of Biochemistry, Amrita Institute of Medical Sciences and Research Centre, Amrita Viswavidyapeetham University, Kochi, Kerala, India over a 4-month period from December 2022 to March 2023. ABG samples collected using either of the techniques were included, while venous BG samples were excluded. The sample size was 10,957 for each of the two groups- Group A and Group B. Group A included samples collected using liquid sodium heparin, and group B included spray-dried, calcium-balanced lithium heparin from different departments. The incidence of blood clots, air bubbles, and inadequate volume was studied. For all categorical variables, the results were expressed as the frequency and percentage of errors. An unpaired t-test (two-tailed) was used for data analysis. Results: In comparison with liquid sodium heparin collection, errors in the quality of the specimen such as blood clots (1.7% to 1.1%), air bubbles (0.04% to 0%), and inadequate volume (0.2% to 0.03%) were significantly reduced (p-value=0.002) with spray-dried, calcium-balanced lithium heparin (BD Preset™ Safety BG Syringe). Conclusion: The present study found that using calcium- balanced lithium heparin syringes over manually flushed liquid sodium heparin syringes reduces the risk of clots, thus preventing equipment malfunction and maintenance costs. With the introduction of preset syringes, the chance of air bubbles and insufficient volume can also be overcomed.