Comparison of Gas Signature and Void Fraction in Water- and Oil-Based Muds Using Fiber-Optic Distributed Acoustic Sensor, Distributed Temperature Sensor, and Distributed Strain Sensor

Abstract

Summary Accurate estimation and prediction of gas rise velocity, length of the gas influx region, and void fraction are important for optimal gas kick removal, riser gas management, and well control planning. These parameters are also essential in monitoring and characterization of multiphase flow. However, gas dynamics in non-Newtonian fluids, such as drilling mud, which is essential for gas influx control, are poorly understood due to the inability to create full-scale annular flow conditions that approximate the conditions observed in the field. This results in a lack of understanding and poor prediction of gas kick behavior in the field. To bridge this gap, we use distributed fiber-optic sensors (DFOS) for real-time estimation of gas rise velocity, void fraction, and influx length in water and oil-based mud (OBM) at the well scale. DFOS can overcome a major limitation of downhole gauges and logging tools by enabling the in-situ monitoring of dynamic events simultaneously across the entire wellbore. This study is the first well-scale deployment of distributed acoustic sensor (DAS), distributed temperature sensor (DTS), and distributed strain sensor (DSS) for investigation of gas behavior in water and OBM. Gas void fraction, migration velocities, and gas influx lengths were analyzed across a 5,163-ft-deep wellbore for multiphase experiments conducted with nitrogen in water and nitrogen in synthetic-based mud, at similar operating conditions. An improved transient drift flux–based numerical model was developed to simulate the experimental processes and understand the gas dynamics in different wellbore fluid environments. The gas velocities, void fractions, and gas influx lengths estimated independently using DAS, DTS, and DSS showed good agreement with the simulation results, as well as the downhole gauge analysis.