Abstract
A series of four different biomass feedstock was washed and hydrothermally carbonized at temperatures of 50 °C and 150–270 °C for four hours, respectively. For the first time both the resulting solid and liquid products were characterised and evaluated in a comprehensive study. Concerning fuel properties, HTC had a higher impact on the fuel quality than washing. HTC yielded hydrochar with higher carbon content than the starting material leading to a significant increase in heating value, while washing only had a minor effect on elemental composition and heating value. Treatment temperature was found to have the highest impact on LHV and elemental composition. Both washing and HTC proved effective in reducing potassium and chlorine content, while earth alkaline, phosphorous and silicon removal was limited. Process water characterisation revealed that filtrates from washing and HTC are acidic, with acidity being increased by HTC. Electrical conductivity of the effluent was found to correlate with the amount of electrolytes Na, K, Mg and Ca in the feedstock, thereby being feedstock dependent. COD, BOD5 and TOC values determined revealed that effluent from both washing and HTC is strongly contaminated by organic matter. The organic load was significantly higher in HTC effluents. Feedstock type was found to be the main influencing factor on effluent characteristics rather than HTC temperature. Nutrients were found in low concentrations.Graphic
Highlights
Biomass plays a crucial role in developing a future sustainable energy system
hydrothermal carbonization (HTC) leads to more extensive changes in atomic H/C and O/C ratios and with increasing treatment temperature hydrochars become increasingly similar to a low-rank coal in terms of elemental composition
The presented study reveals the impact of washing and hydrothermal carbonisation of several feedstock from different biomass types on fuel quality and process water characteristics
Summary
Biomass plays a crucial role in developing a future sustainable energy system. There is a large untapped potential to further increase energetic biomass utilization. Other challenges in energetic biomass utilization arise from ash-related problems such as deposit formation, corrosion, ash-melting and particle formation [1,2,3]. These phenomena can be traced back to inorganic components like potassium (K) and chlorine (Cl) that are abundant in biomass feedstock. About 90% of the alkali metals and chlorine in biomass are present as water-soluble or ion-exchangeable compounds and are susceptible to release during combustion [1, 4,5,6,7]
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
