Comparison of feldspar and meta-halloysite geopolymers by alkaline and acidic activation

Abstract

Geopolymerization, a sustainable route to advanced binders, has traditionally been explored using common activators and single precursors such as metakaolin. Although previous investigations have explored the potential of feldspathic minerals, particularly with metakaolin as a partial replacement, there remains a gap in understanding the nuances of feldspar-phosphate-based geopolymers. This study seeks to fill this gap by providing an in-depth investigation of the properties and reactivity behaviour of three different feldspar quarry wastes, each modified with meta-halloysite at a 15% inclusion rate. This research not only evaluates the effects of both acidic and alkaline activators on the resulting geopolymer properties, but also explores the broader implications of such modifications in different environments at ambient conditions. Using a series of experimental assessments, we have explored how the mineralogical and crystalline identities of these feldspars influence key aspects such as reaction kinetics, physico-mechanical performance, structural and microstructural properties, and even thermal behaviour. The results of the physico-mechanical properties showed that lower water absorption (i.e. less than 9.2%) as well as higher flexural (i.e. about 30 MPa) and compressive strength (i.e. about 40 MPa) can be achieved with the feldspar-based geopolymer in alkaline medium. In acidic medium, the highest flexural and compressive strengths were less than 10 and 19 MPa, respectively, with about 13.5% of water absorption. In acidic to basic medium, the highest cumulative pore volume of the geopolymers increases from 26.5 to 75.2 mm3/g, respectively. The outcomes of this study hold promise for tailoring geopolymer properties for various applications and provide a basis for further work in this area.