Abstract

The Ni+MoS2composite coatings were obtained by electrolytic co-deposition of crystalline nickel with molybdenum sulfide powder from an electrolyte containing suspension of this powder. For comparison, the Ni coating was also deposited. These coatings were obtained in galvanostatic conditions at the current density ofjdep= -250 mA cm-2. A scanning electron microscope was used for surface morphology characterization of the coatings. The behavior of the coatings was investigated in the process of hydrogen evolution reaction from 5 M KOH solution using steady-state polarization and electrochemical impedance spectroscopy methods. It was found that introduction of molybdenum sulfide into nickel matrix, evokes developed and rough surface which is the reason for the increase in the rate of the HER as comapred to the smooth Ni electrode. Thus obtained coatings may be useful in application as electrode materials for the HER.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call