Abstract
Impregnation of European beech (Fagus sylvatica) with 10% w/w aqueous solution of different additives made from the reaction of glycerol or polyglycerol with glycidyl methacrylate or maleic anhydride followed by thermal modification at 150, 200 or 220 °C under inert conditions was investigated to evaluate potential synergies between chemical and thermal treatments. Treated and untreated wood were analysed to evaluate mass changes and bulking values after treatments, resistance of treatment to leaching, wettability, anti-swelling efficiency, modulus of elasticity (MOE), modulus of rupture (MOR), decay resistance against Coriolus versicolor and termite resistance against Reticulitermes flavipes. Results revealed that synergic effects between a combination of light chemical modification and thermal treatments can be observed at higher temperature treatments (200 and 220 °C), improving wood dimensional stability (approximately 80%), decay, and termite resistance properties. However, MOE and MOR values decreased by approximately 30% and 60%, respectively. Treated samples resulting from the combination of chemical and thermal treatment performed at 220 °C present improved durability against the termites R. flavipes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
