Comparison of Different Methods for Ancient Ship Calm Water Resistance Estimation

Abstract

The remains of ancient ships from various time periods are commonly found on land and under the sea in conditions that make it difficult to reconstruct their original form and structure. For this reason, the reconstruction should be supported by other data, such as data on similar ships, but also by certain assumptions. The results of the reconstruction are significant not only in a historical sense but are of exceptional importance when building floating replicas. Two ships, Nin 1 and Nin 2, today for promotional purposes known as Condurae Croaticae, were found in Nin (Croatia) at the end of the 1960s. They are about 8 to 10 m long, and tentatively dated to the 11th century AD, although there are indications that they could be dated two centuries later. Based on archaeological finds exhibited in the Museum of Nin Antiquities, hull line drawings were created, according to which two floating replicas were made at the end of the 1990s. Considering the problem of hogging that appeared in both ships, a new proposal for the reconstruction of the original hull lines was performed based on the available documentation. The aim of this paper is a systematic analysis of its calm water resistance. Based on the established credibility of experimental testing, a scale model (1:4 ratio) of the Nin 1 vessel is constructed and evaluated through towing tank experiments. The second approach, the CFD method, is a reliable numerical method for calm resistance estimation, but it is rarely used in the analysis of ancient ships. Finally, the widely used empirical Holtrop method is also applied, but it was developed for ships of larger dimensions and with large parts of flat bottoms and, therefore, the more appropriate Delft Hull Yacht Series method is also tested. The results obtained by applying the four mentioned methods are compared and discussed.